Search our PEM catalog here, or view other manufacturers.

  1. Manufacturers
  2. Services
  3. About Us
  4. What’s New
  5. Careers
  6. Contact
  7. Search

Product Catalog

Tel 800.466.1940
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows s
Unit of Measure

Thread Size x Pitch

 N/A M10 x 1.5

Thread Code

 N/A M10

Length Code

 N/A 25

Material Code

 N/A B

Min. Sheet Thickness

 N/A 2.3 mm

Hole Size in Sheet + 0.13

 N/A 10.00 mm

Max. Hole in Attached Parts

 N/A 11.50 mm
L - Length ± 0.41
N/A 25 mm a1379_1.jpg

H ± 0.25

 N/A 15.70 mm
S Max.2 N/A 4.10 mm

T Max.

 N/A 2.29 mm
Min. Dist. Hole C/L to Edge3 N/A 13.70 mm

Thread Strength

 N/A 415 MPa

For Use in Sheet Hardness

 N/A HRB 55 / HB 83 or Less

Thread Specification

 N/A External, ASME B1.13M, 6g

Fastener Material

 N/A CDA-510 Phosphor Bronze

Standard Finish

 N/A No Finish

CAD Supplier

 N/A PennEngineering® (PEM®)

Inventory

 N/A {0}
  • 1 The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”
  • 2 Threads are gageable to within 2 pitches of the “S” Max. dimension. A class 3B/5H maximum material commercial nut shall pass up to the “S” Max. dimension.
  • 3 To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.