Search our PEM catalog here, or view other manufacturers.

  1. Manufacturers
  2. Services
  3. About Us
  4. What’s New
  5. Careers
  6. Contact

Product Catalog

Batch CAD Cart (0)
  • Cart is empty
  • Joining a metal panel to a PCB or plastic panel.
  • Can be also used for single point hinging applications (not primary use).
Unit of Measure

Panel 1 Thickness ±0.08mm/±.003in

N/A 0.80 mm.031 in

Panel 1 Mounting Hole +0.08mm/+.003 –.000in

N/A 5.00 mm.197 in
Panel 2 Thickness Min.1 N/A 1.60 mm.063 in

Panel 2 Mounting Hole +0.08mm/+.003 –.000in

N/A 4.50 mm.177 in

C1 Max.

N/A 4.98 mm.196 in a1308_1.jpg

C2 ±0.08mm/±.003in

N/A 4.90 mm.193 in

E Max.

N/A 5.56 mm.219 in
L Max.2 N/A 2.31 mm.091 in
Min. Dist. Hole C/L to Edge3 N/A 5.1 mm.20 in

Standard Material

N/A Low Carbon Steel

Standard Finish

N/A Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless
For Use in Sheet Hardness4 N/A HRB 80 / HB 150 or less

CAD Supplier

N/A PennEngineering® (PEM®)

Inventory

N/A {0}
  • 1 Fastener will provide flush application at minimum sheet thickness.
  • 2 The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”
  • 3 To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.
  • 4 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.