Search our PEM catalog here, or view other manufacturers.

  1. Manufacturers
  2. Services
  3. About Us
  4. What’s New
  5. Careers
  6. Contact

Product Catalog

Batch CAD Cart (0)
  • Cart is empty
PEM® TY-D® self-clinching tie-mounts provide secure attachment points for mounting wires to electronic chassis or enclosures. TY-D hardware installs quickly and permanently without screws and eliminates the use of adhesives that typically fail over time and temperature cycling.

TY-D hardware can be a great improvement over traditional mounting methods. They can be placed with assurance at designed locations and angles to remain secure for the life of the assembly; they will not protrude on the reverse side and will not affect the reverse side appearance or clearance; and panels remain flush, minimizing EMI/RFI and contamination of electronics by dust or dirt.
Unit of Measure

Type

N/A TD
Profile1 N/A 175

Length Code

N/A 12
L - Length ± .0032
N/A .371 in a1299_1.jpg

Sheet Thickness

N/A .040 - .125 in

Hole Size In Sheet + .002 -.001

N/A .500 x .375 in

A ± .003

N/A .496 in

B ± .006

N/A .130 in

C ± .006

N/A .095 in

D ± .006

N/A .360 in

E ± .006

N/A .562 in

G - Height ± .006

N/A .285 in

Min. Hole Edge to Sheet Edge K

N/A .040 in

Min. Hole Edge to Sheet Edge M

N/A .262 in

Standard Material

N/A Sintered Steel

Standard Finish

N/A Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless

Max. Panel Hardness

N/A HRB 60 / HB 107

Inventory

N/A {0}
  • 1 Reference to typical load rating (in pounds) for appropriate size nylon cable tie.
  • 2 The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”