| Hi-Tech Fasteners Inc.
top
Search Catalog 
      GO   
 All Categories    Steel and Stainless Steel Nuts (Metric)
All Categories > PEM / Penn Engineering > Self-Clinching Fasteners for Sheet Metal > Self-Clinching Nuts > Steel and Stainless Steel Nuts > Steel and Stainless Steel Nuts (Metric) > Item # CLSS-M5-2  
Request Information

Item # CLSS-M5-2



Strong internal threads in sheets as thin as .030" / 0.8 mm. Thread sizes #2 to 1/2"and M2 to M10.

For load-bearing threads in thin sheets - aluminum, steel, and other ductile materials.
  • Proved Performance
    For over 60 years, PEM brand self-clinching fasteners have satisfied production and fastening requirements wherever load-bearing threads are required in thin metal sections too thin to tap.
  • Quick, convenient assembly using standard tools
    Installation of PEM brand self-clinching nuts is simple, quick, and convenient. Just insert them in punched or drilled holes, then apply a squeezing force to embed the clinching ring completely in the sheet metal.
  • High pushout & torque-out resistance
    The clinching ring locks the displaced metal behind the tapered shank, ensuring high pushout resistance. High torque-out resistance is ensured when the knurled platform is embedded in the sheet metal.
  • Distortion-free installation
    Proper installation forces will not distort or damage the threads in PEM nuts because the recommended shank length is always less than the minimum sheet thickness.
  • Reverse side remains flush
    All clinching takes place on the fastener side of the sheet. The reverse side remains flush and smooth.
  • Self-clinching Locknuts
  • These locknuts (Type SL™) are designed with a unique and economical TRI-DENT® locking feature, which meets demanding locking performance requirements.
  • Thin Sheet Self-clinching Nuts
    These nuts (Type SMPS™) feature a lower profile and can be mounted closer to the edge of a sheet than standard self-clinching nuts.
  • Self-clinching nuts for stainless steel
    PEM 300® self-clinching nuts (Type SP™) are especially designed for permanent installation into stainless steel sheets as thin as .030"/ 0.8 mm.
    Machined from a specialty stainless steel, these fasteners are then heat-treated to a hardness higher than most 300 Series stainless steels. This feature enables PEM 300 fasteners to be installed into stainless steel sheets, employing the same self-clinching principle which has proved successful over the years in thousands of applications.

Quantity Discount Available.
Request Quote for orders less than 1000 or 5000, depending on fastener type.


PEM Self-Clinching Nuts

larger image

Dimensional Drawing

larger image


 Specifications  Material & Finish Specifications  

Type

CLSS

Thread Size

M5 x 0.8

Fastener Material

Stainless Steel

Thread Code

M5

A (Shank) Max.

1.38 mm

Min. Sheet Thickness

1.4 mm

Hole Size in Sheet (+0.08)

6.35 mm

C Max.

6.33 mm

E (± 0.25)

8.7 mm

T (± 0.25)

2 mm

Min. Dist. Hole C/L to Edge

7.1 mm

Inventory

83022

    Download PDF Download PDF  
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

 MORE IMAGES 

· Self-Clinching Nuts Cross Section

· Performance Data

· Self-Clinching Nuts Specs Sheet

· PEM Treadmark


Request Information