| Hi-Tech Fasteners Inc.
top
Search Catalog
        
 All Categories    Type DSO and DSOS Threaded Standoffs for Close-to-Edge Applications (Unified)
All Categories > PEM / Penn Engineering > Standoffs & Spacers > Self-Clinching Standoffs > Type DSO and DSOS Threaded Standoffs for Close-to-Edge Applications > Type DSO and DSOS Threaded Standoffs for Close-to-Edge Applications (Unified) > View Items  

Type DSO and DSOS Threaded Standoffs for Close-to-Edge Applications (Unified)

Check up to five results to perform an action.


Self-clinching, threaded standoffs for use in close-to-edge applications.
  • These standoffs, which use the proven self-clinching design, install with a squeeze in punched or drilled round holes - and become permanently mounted in the thin sheet.
  • PEM® brand thru-hole threaded standoffs are installed with their heads flush with one surface of the mounting sheet. When blind-threaded types are used, outer sheet surfaces are not only flush, but closed as well. Unthreaded standoffs are also available for spacing multi-panel assemblies.
  • Types SO4 and BSO4 standoffs are for installation into stainless steel sheets as thin as 0.040" / 1.02 mm.
  • Types TSO, TSOS, and TSOA self-clinching threaded standoffs provide permanent threads in sheets as thin as 0.025" / 0.63 mm.
  • PEM® self-clinching standoffs are also available on special order in non-heat treated carbon steel as type SON (thru-hole threaded) or BSON (blind threaded).
  • Types DSO and DSOS standoffs are available for close-to-edge applications.
  • If you require a standoff which we do not offer in this bulletin. We will be happy to work with you to satisfy your special need.
Quantity Discount Available.
Request Quote for orders less than 1000 or 5000, depending on fastener type.





    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
   
  Results 1 - 4 of 4 1 

Item #

Type

Thread Size

Fastener Material

Hole Size in Sheet (+0.003 / -0.000)

Length (L)

Standard Finishes

Inventory

DSOS-440-250 DSOS (#4-40)
0.112-40
Stainless Steel 0.166 in. 0.250 in. Passivated and \ or Tested Per ASTM A380 {}
DSOS-440-275 DSOS (#4-40)
0.112-40
Stainless Steel 0.166 in. 0.275 in. Passivated and \ or Tested Per ASTM A380 {}
DSO-440-250ZI DSONS (#4-40)
0.112-40
Steel 0.166 in. 0.250 in. Zinc Per ASTM B 633 SC1 (5µm) Type III, Colorless {}
DSO-440-275ZI DSONS (#4-40)
0.112-40
Steel 0.166 in. 0.275 in. Zinc Per ASTM B 633 SC1 (5µm) Type III, Colorless {}
  Results 1 - 4 of 4 1