| Hi-Tech Fasteners Inc.
top
Search Catalog
        
 All Categories    Unified Coarse Tangless Inserts
All Categories > Heli-Coil > Screw Thread Inserts > Tangless Free Running & Screw Locking > Unified Coarse Tangless Inserts > View Items  

Unified Coarse Tangless Inserts

Check up to five results to perform an action.


Tangless threaded inserts provide many advantages over tanged inserts.

They eliminate the need for tang break off and tang retrieval and allow for non-destructive insert removal. Tangless inserts are easily adjusted and easily removed after installation.

Inch and metric size inserts are available in stainless steel and gall resistant (or Nitronic 60) materials. Finish options include Primer Free II, Dry Film Lube (and Cadmium when required by Mil. Spec.)





    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
   
  Results 1 - 12 of 12 1 

Item #

Nominal Thread Size

Type

Size Designation

1 Diameter A Nominal Length

Minimum Free Outside Diameter

Maximum Free Outside Diameter

T3585-02C 2 in - 56 Screw-Locking 02C .086 in .110 in .119 in
T3585-04C 4 in - 40 Screw-Locking 04C .112 in .144 in .159 in
T3585-06C 6 in - 32 Screw-Locking 06C .138 in .178 in .193 in
T3585-2C 8 in - 32 Screw-Locking 2C .164 in .205 in .220 in
T3585-3C 10 in - 24 Screw-Locking 3C .190 in .244 in .259 in
T3585-4C 1/4 in - 20 Screw-Locking 4C .250 in .310 in .330 in
T1185-02C 2 in - 56 Free Running 02C .086 in .110 in .119 in
T1185-04C 4 in - 40 Free Running 04C .112 in .144 in .159 in
T1185-06C 6 in - 32 Free Running 06C .138 in .178 in .193 in
T1185-2C 8 in - 32 Free Running 2C .164 in .205 in .220 in
T1185-3C 10 in - 24 Free Running 3C .190 in .244 in .259 in
T1185-4C 1/4 in - 20 Free Running 4C .250 in .310 in .330 in
  Results 1 - 12 of 12 1