| Hi-Tech Fasteners Inc.
top
Search Catalog
        
 All Categories    Metric Fine Gages
All Categories > Heli-Coil > Taps & Gages > Gages > Metric Fine Gages > View Items  

Metric Fine Gages

Check up to five results to perform an action.

Heli-Coil STI Thread Plug Gages (metric) for checking the tapped hole are listed in chart.
The complete gage consist of the GO thread plug gage, the HI thread plug gage and the appropriately marked gage handle.
Accuracy of the finished thread, when the insert is installed, is dependent upon the accuracy of the tapped hole. If the finished tapped hole gages satisfactorily, the installed insert will be within the thread tolerance. It is,therefore, not necessary to gage the installed insert.
After the insert is installed, the GO thread plug gage may not enter freely;however, the insert and tightened.(Refernce MA1567)
When gaging tapped holes which have been throughly cleaned or which have a protective finish applied, the gage should always be lubricated with light oil.
The HI thread plug gage results on or before the second turn of entry.(Refernce ANSIB1.16)





    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
   
  Results 1 - 19 of 19 1 

Item #

Nominal Thread Size

Complete Reference Gage 4H5H

M10X15416-10 M10x1 5416-10
M10X1.255424-10 M10X1.25 5424-10
M12X1.255424-12 M12X1.25 5424-12
Ml 2X1.55480-12 Ml 2X1.5 5480-12
M14X1.55480-14 M14X1.5 5480-14
M16X1.55480-16 M16X1.5 5480-16
M18X1.55480-18 M18X1.5 5480-18
M20X1.55480-20 M20X1.5 5480-20
M22X1.55480-22 M22X1.5 5480-22
M18X25418-18 M18X2 5418-18
M20X25418-20 M20X2 5418-20
M22X25418-22 M22X2 5418-22
M24X25418-24 M24X2 5418-24
M27X25418-27 M27X2 5418-27
M30X25418-30 M30X2 5418-30
M33X25418-33 M33X2 5418-33
M36X25421-36 M36X2 5421-36
M39X35421-39 M39X3 5421-39
M8X15416-8 M8x1 5416-8
  Results 1 - 19 of 19 1