Search our PEM catalog here, or view other manufacturers.

  1. Manufacturers
  2. Services
  3. About Us
  4. What’s New
  5. Careers
  6. Contact

Product Catalog

Batch CAD Cart (0)
  • Cart is empty
  • Installs into thin, harder, high strength steel materials (high strength steel sheets at 975MPA maximum ultimate tensile)
  • Allows overall weight reduction for all vehicles
  • Provides lower installed cost
  • Unplated threads may be oversized sized as permitted by thread standards to accept minimum plating thickness of .00020”/.0051 mm
Compare to other thin sheet fastening devices:
  • Addresses environmental concerns
  • Smaller outer diameter
  • Lighter weight
  • Flush on reverse side of panel
  • Close to edge of panel mounting
  • No embossing required
  • Hardened nut material provides stronger thread strength
  • Can be installed automatically using press or in-die technology
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1 

Part #

Thread Size x Pitch

A (Shank) Max.

Hole Size in Sheet + 0.08

E ± 0.25

Fastener Material

CAD

Inventory

Add To Cart/Request Quote
N/A M6 x 1 N/A 1.38 mm N/A 8.75 mm N/A 11.18 mm N/A Hardened Alloy Steel N/A N/A {0} Add To Cart
Request Quote
N/A M6 x 1 N/A 2.21 mm N/A 8.75 mm N/A 11.18 mm N/A Hardened Alloy Steel N/A N/A {0} Add To Cart
Request Quote
N/A M8 x 1.25 N/A 1.38 mm N/A 10.5 mm N/A 12.7 mm N/A Hardened Alloy Steel N/A N/A {0} Add To Cart
Request Quote
N/A M8 x 1.25 N/A 2.21 mm N/A 10.5 mm N/A 12.7 mm N/A Hardened Alloy Steel N/A N/A {0} Add To Cart
Request Quote
N/A M10 x 1.5 N/A 2.21 mm N/A 14 mm N/A 17.35 mm N/A Hardened Alloy Steel N/A N/A {0} Add To Cart
Request Quote
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1