| Hi-Tech Fasteners Inc.
top
Search Catalog
        
 All Categories    Type RAA-Aluminium Self-Tapping Right Angle Fastener (Unified)
All Categories > PEM / Penn Engineering > Self-Clinching Fasteners for Sheet Metal > Right Angle Clinching Fasteners > Type RAA-Aluminium Self-Tapping Right Angle Fastener > Type RAA-Aluminium Self-Tapping Right Angle Fastener (Unified) > View Items  

Type RAA-Aluminium Self-Tapping Right Angle Fastener (Unified)

Check up to five results to perform an action.


Provide strong right angle attachment points in aluminum sheets. Attachment is easily made using thread forming screws.

Self-clinching PEM® R'ANGLE® fasteners provide you with strong right angle attachment points in sheets as thin as 0.040"/1 mm.

R'ANGLE fasteners are cost-effective replacements for:
  • bent edge tabs
  • bent center tabs
  • bent flanges
  • angle brackets
  • tack welds
  • loose hardware
Simply press this fastener into a properly sized rectangular mounting hole. It is held permanently in the sheet or panel using the same high-performance, self-clinching technology that our products have employed since 1942.

Now you can securely attach another sheet or component perpendicular to the sheet in which the R'ANGLE fastener is installed. For Type RAA, attachment is easily made using thread forming screws resulting in a thread fit which resists vibration and has excellent torque resistance. Type RAS fasteners are threaded and attachment is simply made using a standard screw. For either type, the holding power of the fastener is unaffected by the repeated removal and reinstallation of the screw.

PEM® R'ANGLE fasteners provide many advantages over bent tabs and flanges, including:
  • more predictable designs
  • material savings
  • tighter design control
  • improved shielding characteristics
  • reduction of loose hardware
  • fewer assembly steps
  • unmarred panel surfaces
Quantity Discount Available.
Request Quote for orders less than 1000 or 5000, depending on fastener type.





    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
   
  Results 1 - 6 of 6 1 

Item #

Type

Thread Form Screw Size

Screw Size Code

Length (L)

Min. Sheet Thickness

Inventory

RAA4-9-6 RA #4-40 4 0.183 in. 0.040 in. {}
RAA4-9-8 RA #4-40 4 0.246 in. 0.040 in. {}
RAA6-10-8 RA #6-32 6 0.246 in. 0.040 in. {}
RAA6-10-10 RA #6-32 6 0.308 in. 0.040 in. {}
RAA8-12-9 RA #8-32 8 0.277 in. 0.040 in. {}
RAA8-12-12 RA #8-32 8 0.371 in. 0.040 in. {}
  Results 1 - 6 of 6 1