| Hi-Tech Fasteners Inc.
top
Search Catalog
        
 All Categories    Type FH4 and FHP Flush-Head Studs (Unified)
All Categories > PEM / Penn Engineering > Self-Clinching Fasteners for Sheet Metal > Stainless Steel Sheet Fasteners > Type FH4 and FHP Flush-Head Studs > Type FH4 and FHP Flush-Head Studs (Unified) > View Items  

Type FH4 and FHP Flush-Head Studs (Unified)

Check up to five results to perform an action.


Specially hardened stainless steel fasteners for use in stainless steel sheets.
  • Permanent installation into stainless steel sheets as thin as .040" /1 mm.• For use in sheets of HRB 92 or less.
  • One of the very basics of self-clinching is that the fastener must be harder than the host sheet. Only then will the fastener perform as intended. This is particularly challenging when installing fasteners into stainless steel sheets.
  • Therefore we have developed this line of specially hardened stainless steel fasteners. When pressed in they become an integral part of the sheet. They allow the use of stainless steel sheet to satisfy applications, which require lighter, stronger designs that must perform in challenging environments. Effectively eliminate welding and reduce loose hardware.
  • PEM self-clinching nuts provide strong load-bearing threads in stainless sheets as thin as 0.030"/0.8mm. When properly installed the nuts mount permanently in the sheets with one side completely flush within the panel. PEM type SP nuts also provide significant corrosion resistant properties for the most demanding conditions.
  • PEM self-clinching flush-head studs can be mounted in stainless sheets as thin as 0.040"/1mm. These studs offer convenient attachment points and achieve excellent performance values. Type FHP studs have high corrosion resistance. You can select either the FH4 or FHP types depending on the level of corrosion resistance that you require.
  • PEM self-clinching standoffs provide a permanently mounted fastener that can be used for mounting, stacking or spacing components to or from stainless steel panels. Pressed into stainless sheets as thin as 0.040"/1.02mm these fasteners are available as Type SO4 (blind) or Type BSO4 (through hole) types.
  • PEM self-clinching panel fasteners provide "tool only" access to your stainless steel assemblies.
  • Fasteners made from precipitation hardened grade stainless are particularly useful in applications such as outdoor equipment, medical devices and chemical and food processing equipment or anywhere corrosive element exposure is possible.
Quantity Discount Available.
Request Quote for orders less than 1000 or 5000, depending on fastener type.






    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
   
  Results 1 - 25 of 82 1 2 3 4 

Item #

Type

Thread Size

Length (L)

Sheet Thickness

Hole Size in Sheet (+0.003 / -0.000)

Inventory

FH4-440-4 FH4 (#4-40)
0.112-40
0.250 in. 0.040 - 0.095 in. 0.111 in. {}
FH4-440-5 FH4 (#4-40)
0.112-40
0.312 in. 0.040 - 0.095 in. 0.111 in. {}
FH4-440-6 FH4 (#4-40)
0.112-40
0.375 in. 0.040 - 0.095 in. 0.111 in. {}
FH4-440-8 FH4 (#4-40)
0.112-40
0.600 in. 0.040 - 0.095 in. 0.111 in. {}
FH4-440-10 FH4 (#4-40)
0.112-40
0.625 in. 0.040 - 0.095 in. 0.111 in. {}
FH4-440-12 FH4 (#4-40)
0.112-40
0.750 in. 0.040 - 0.095 in. 0.111 in. {}
FH4-440-14 FH4 (#4-40)
0.112-40
0.875 in. 0.040 - 0.095 in. 0.111 in. {}
FH4-440-16 FH4 (#4-40)
0.112-40
1.00 in. 0.040 - 0.095 in. 0.111 in. {}
FH4-632-4 FH4 (#6-32)
0.138-32
0.250 in. 0.040 - 0.095 in. 0.137 in. {}
FH4-632-5 FH4 (#6-32)
0.138-32
0.312 in. 0.040 - 0.095 in. 0.137 in. {}
FH4-632-6 FH4 (#6-32)
0.138-32
0.375 in. 0.040 - 0.095 in. 0.137 in. {}
FH4-632-8 FH4 (#6-32)
0.138-32
0.600 in. 0.040 - 0.095 in. 0.137 in. {}
FH4-632-10 FH4 (#6-32)
0.138-32
0.625 in. 0.040 - 0.095 in. 0.137 in. {}
FH4-632-12 FH4 (#6-32)
0.138-32
0.750 in. 0.040 - 0.095 in. 0.137 in. {}
FH4-632-14 FH4 (#6-32)
0.138-32
0.875 in. 0.040 - 0.095 in. 0.137 in. {}
FH4-632-16 FH4 (#6-32)
0.138-32
1.00 in. 0.040 - 0.095 in. 0.137 in. {}
FH4-632-20 FH4 (#6-32)
0.138-32
1.25 in. 0.040 - 0.095 in. 0.137 in. {}
FH4-632-24 FH4 (#6-32)
0.138-32
1.50 in. 0.040 - 0.095 in. 0.137 in. {}
FH4-832-4 FH4 (#8-32)
0.164-32
0.250 in. 0.040 - 0.095 in. 0.163 in. {}
FH4-832-5 FH4 (#8-32)
0.164-32
0.312 in. 0.040 - 0.095 in. 0.163 in. {}
FH4-832-6 FH4 (#8-32)
0.164-32
0.375 in. 0.040 - 0.095 in. 0.163 in. {}
FH4-832-8 FH4 (#8-32)
0.164-32
0.600 in. 0.040 - 0.095 in. 0.163 in. {}
FH4-832-10 FH4 (#8-32)
0.164-32
0.625 in. 0.040 - 0.095 in. 0.163 in. {}
FH4-832-12 FH4 (#8-32)
0.164-32
0.750 in. 0.040 - 0.095 in. 0.163 in. {}
FH4-832-14 FH4 (#8-32)
0.164-32
0.875 in. 0.040 - 0.095 in. 0.163 in. {}
  Results 1 - 25 of 82 1 2 3 4