| Hi-Tech Fasteners Inc.
top
Search Catalog
        
 All Categories    Type PR10 Self-Clinching Flush-Mounted Retainers (Metric)
All Categories > PEM / Penn Engineering > Self-Clinching Fasteners for Sheet Metal > Type PR10 Self-Clinching Flush-Mounted Retainers (Metric) > View Items  

Type PR10 Self-Clinching Flush-Mounted Retainers (Metric)

Check up to five results to perform an action.


Captive screws with self-clinching retainers can be flush mounted into sheets as thin as 0.125" /3.2 mm. Thread sizes #4 to #10 and M3 to M5.
  • Screw head is flush in sheets as thin as 0.125” / 3.2 mm.
  • Screw remains captive in retainer when disengaged.
  • For use in sheets of HRB 70 or less.
  • PEM brand access hardware is designed with captive screws to help keep parts to a minimum and eliminate risks associated with loose hardware that could fall out and damage internal components. These panel fastener assemblies are ideal to attach metal panels or other thin material components in applications where subsequent access will be necessary.
  • PEM threaded access hardware types include self-clinching panel fasteners with low-profile design that hugs front panels and a large knurl for ease of use; self-clinching panel fasteners with universal slot/Phillips recess; tool or hand actuated self-clinching panel fasteners in steel or stainless steel to resist corrosion; stainless steel panel fasteners that meet UL 1950 “service access area” requirements; low-cost self-clinching panel fasteners featuring a small, compact, and low-profile design for limited access areas; flush-mounted panel screw components; snap-in panel fasteners designed to be installed without tools; press-in panel fasteners allowing for radial float to compensate for mating hole misalignment; and surface mount panel fasteners.
Quantity Discount Available.
Request Quote for orders less than 1000 or 5000, depending on fastener type.





    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
   
  Results 1 - 3 of 3 1 

Item #

Type

Thread Size x Pitch

A (Shank) Max.

Min. Sheet for Self-Clinching

Hole Size in Sheet (+0.08)

Standard Finishes

Inventory

PR10-M3 PR10 M3 x 0.5 3.18 mm 1.27 mm 7.14 mm Passivated and \ or Tested Per ASTM A380 {}
PR10-M4 PR10 M4 x 0.7 3.18 mm 1.27 mm 8.74 mm Passivated and \ or Tested Per ASTM A380 {}
PR10-M5 PR10 M5 x 0.8 3.18 mm 1.27 mm 9.53 mm Passivated and \ or Tested Per ASTM A380 {}
  Results 1 - 3 of 3 1