Search our PEM catalog here, or view other manufacturers.

  1. Manufacturers
  2. Services
  3. About Us
  4. What’s New
  5. Careers
  6. Contact

Product Catalog

Batch CAD Cart (0)
  • Cart is empty
Unit of Measure
Items
Threaded Standoffs for Installation Into Ultra-Thin Stainless Steel Sheets as Thin as .025” - Types TSO4 - Unified

Threaded Standoffs for Stainless Sheets as Thin as 0.63mm - Types TSO4 – Metric

Threaded Standoffs for Installation Into Ultra-Thin Stainless Steel Sheets as Thin as .025” - Types TSO4 - Unified

Threaded Standoffs for Stainless Sheets as Thin as 0.63mm - Types TSO4 – Metric

Threaded Standoffs for Installation Into Ultra-Thin Stainless Steel Sheets as Thin as .025” - Types TSO4 - Unified

Threaded Standoffs for Stainless Sheets as Thin as 0.63mm - Types TSO4 – Metric

Threaded Standoffs for Installation Into Ultra-Thin Stainless Steel Sheets as Thin as .025” - Types TSO4 - Unified

Threaded Standoffs for Stainless Sheets as Thin as 0.63mm - Types TSO4 – Metric

Threaded Standoffs for Installation Into Ultra-Thin Stainless Steel Sheets as Thin as .025” - Types TSO4 - Unified

Threaded Standoffs for Stainless Sheets as Thin as 0.63mm - Types TSO4 – Metric
Thread Size x Pitch N/A M2.5 x 0.45
Thread Code N/A M25
Length Code N/A 200 N/A 300 N/A 400 N/A 600 N/A 800
Style1 N/A #1 N/A #1 N/A #1 N/A #1 N/A #2
Min. Sheet Thickness N/A 0.63 mm
Hole Size in Sheet + 0.08 N/A 4.22 mm
C - 0.13
N/A 4.2 mm TSO4_Dwgs_1.jpg
F - Min. Thread Depth N/A 5.2 mm
H - Nom. N/A 4.8 mm
L - Length ± 0.082 N/A 2 mm N/A 3 mm N/A 4 mm N/A 6 mm N/A 8 mm
Min. Dist. Hole C/L to Edge3 N/A 5.8 mm
For Use in Sheet Hardness4 N/A HRB 88 / HB 183 or Less
Thread Specification N/A Internal, ASME B1.13M, 6H
Fastener Material N/A Heat treated 400 Series Stainless Steel
Standard Finish N/A Passivated and/or tested per ASTM A380
Inventory N/A {0} N/A {0} N/A {0} N/A {0} N/A {0}
  • 1 Style #1 - Thru-threaded.
    Style #2 - Screw might not pass through unthreaded end. Tapped to minimum full thread depth shown. Incomplete threads on tap may allow screw to pass through.
    Style #3 - Blind.
  • 2 Available in other lengths on special order.
  • 3 To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.
  • 4 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.