Search our PEM catalog here, or view other manufacturers.

  1. Manufacturers
  2. Services
  3. About Us
  4. What’s New
  5. Careers
  6. Contact

Product Catalog

Batch CAD Cart (0)
  • Cart is empty
MSOFS™ microPEM® Flaring Standoffs
Ideal miniature fastener solution to attach components in compact electronic assemblies
  • New MSOFS™ microPEM® flaring standoffs attach permanently in panels as thin as 0.2 mm of any hardness, including stainless steel.
  • Can be installed into any type of panel, including metal, plastic and P.C. Board.
  • Flaring feature allows for installation into multiple panels.
  • Small footprint allows for reduced centerline-to-edge designs.
  • Threads as small as M1.
Unit of Measure
Items
microPEM® Flaring Standoffs - Type MSOFS™

Self-clinching microPEM® Flaring Standoffs Type MSOFS™ - Metric

microPEM® Flaring Standoffs - Type MSOFS™

Self-clinching microPEM® Flaring Standoffs Type MSOFS™ - Metric

microPEM® Flaring Standoffs - Type MSOFS™

Self-clinching microPEM® Flaring Standoffs Type MSOFS™ - Metric

microPEM® Flaring Standoffs - Type MSOFS™

Self-clinching microPEM® Flaring Standoffs Type MSOFS™ - Metric

microPEM® Flaring Standoffs - Type MSOFS™

Self-clinching microPEM® Flaring Standoffs Type MSOFS™ - Metric
Thread Size x Pitch N/A M1 x 0.25 N/A M1 x 0.25 N/A M1.2 x 0.25 N/A M1.2 x 0.25 N/A M1.4 x 0.3
Sheet Thickness N/A 0.2 to 0.3 mm
Hole Size in Sheet +0.05 N/A 3 mm
C Max. N/A 2.39 mm
D Max. N/A 2.97 mm
H Nom. N/A 3.5 mm
L +0.05 -0.081 N/A 2 mm N/A 3 mm N/A 2 mm N/A 3 mm N/A 2 mm
T ±0.05 N/A 0.25 mm
Min. Dist. Hole C/L to Edge2 N/A
Thread Specification N/A Metric ISO 68-1, 5H N/A Metric ISO 68-1, 5H N/A Metric ISO 68-1, 5H N/A Metric ISO 68-1, 5H N/A Metric ISO 68-1, 6H
Fastener Material N/A 300 Series Stainless Steel
Standard Finish N/A Passivated and/or tested per ASTM A380
For Use in Sheet Hardness N/A Any panel hardness
CAD Supplier N/A PennEngineering® (PEM®)
Inventory N/A {0} N/A {0} N/A {0} N/A {0} N/A {0}
  • 1 The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”
  • 2 To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.