Product Catalog

Tel 800.466.1940

Batch CAD Cart (0) ▾

Single point hinging applications.
Can be also used for single point hinging applications (not primary use).
Type SWF fasteners are shipped with mating washers (made of carbon steel, Zinc Plated, 5µm, Colorless).

Request Information Add to CAD Cart

Unit of Measure

Items	SFW-3-0.8-LZ Type SFW SpotFast® Fasteners with Wave Washer for Single Point Hinging Applications Add To Cart Request Quote	SFW-3-1.0-LZ Type SFW SpotFast® Fasteners with Wave Washer for Single Point Hinging Applications Add To Cart Request Quote	SFW-3-1.2-LZ Type SFW SpotFast® Fasteners with Wave Washer for Single Point Hinging Applications Add To Cart Request Quote	SFW-3-1.6-LZ Type SFW SpotFast® Fasteners with Wave Washer for Single Point Hinging Applications Add To Cart Request Quote	SFW-5-0.8-LZ Type SFW SpotFast® Fasteners with Wave Washer for Single Point Hinging Applications Add To Cart Request Quote
Panel 1 Thickness ±0.08mm/±.003in	N/A 0.80 mm.031 in	N/A 1.00 mm.039 in	N/A 1.20 mm.047 in	N/A 1.60 mm.063 in	N/A 0.80 mm.031 in
Panel 1 Mounting Hole +0.08mm/+.003 –.000in	N/A 3.00 mm.118 in	N/A 3.00 mm.118 in	N/A 3.00 mm.118 in	N/A 3.00 mm.118 in	N/A 5.00 mm.197 in
Panel 2 Thickness Min.¹	N/A 0.80 mm.031 in	N/A 1.00 mm.039 in	N/A 1.20 mm.047 in	N/A 1.60 mm.063 in	N/A 0.80 mm.031 in
Panel 2 Mounting Hole +0.08mm/+.003 –.000in	N/A 2.50 mm.098 in	N/A 2.50 mm.098 in	N/A 2.50 mm.098 in	N/A 2.50 mm.098 in	N/A 4.00 mm.157 in
C₁ Max.	N/A 2.98 mm.117 in	N/A 2.98 mm.117 in	N/A 2.98 mm.117 in	N/A 2.98 mm.117 in	N/A 4.98 mm.196 in
C₂ Max.	N/A 2.48 mm.097 in	N/A 2.48 mm.097 in	N/A 2.48 mm.097 in	N/A 2.48 mm.097 in	N/A 3.97 mm.156 in
E Max.	N/A 3.53 mm.139 in	N/A 3.76 mm.148 in	N/A 3.76 mm.148 in	N/A 3.76 mm.148 in	N/A 5.56 mm.219 in
L Max.²	N/A 2.09 mm.082 in	N/A 2.49 mm.098 in	N/A 2.90 mm.114 in	N/A 3.71 mm.146 in	N/A 1.98 mm.078 in
Nominal Gap between Panels	N/A 0.39-0.51 mm.015-.020 in	N/A 0.38-0.51 mm.015-.020 in	N/A 0.38-0.51 mm.015-.020 in	N/A 0.38-0.51 mm.015-.020 in	N/A 0.38-0.51 mm.015-.020 in
Min. Dist. Hole C/L to Edge³	N/A 2.54 mm.100 in	N/A 2.54 mm.100 in	N/A 2.54 mm.100 in	N/A 2.54 mm.100 in	N/A 3.6 mm.14 in
Material Fastener	N/A Low Carbon Steel
Material Washer	N/A Carbon Steel
Finish Fastener	N/A Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless plus sealant/lubricant
Finish Washer	N/A Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless
CAD Supplier	N/A PennEngineering® (PEM®)
Inventory	N/A {0}	N/A {0}	N/A {0}	N/A {0}	N/A {0}
¹ Fastener will provide flush application at minimum sheet thickness. ² The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L” ³ To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.