Search our PEM catalog here, or view other manufacturers.

  1. Manufacturers
  2. Services
  3. About Us
  4. What’s New
  5. Careers
  6. Contact
  7. Search

Product Catalog

Tel 800.466.1940
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Request CAD files
  • Simply snap screw into retainer to complete assembly, spring action of plastic “fingers” holds screw in retracted position
  • Lobed Black ABS Cap standard
  • Other molded-thru colors available on special order
  • If you require a custom color or yo
Unit of Measure

Thread Size x Pitch

 M3.5 x 0.6
Cap Color1

Green #005

CAD View

 Retracted

C ± 0.25

 11.18 mm
a1311_1.jpg

E ± 0.25

 13.77 mm

G ± 0.64

 4.78 mm
L ± 0.382 12.95 mm

P ± 0.64

 0 mm

T Nom.

 16.84 mm

T1 Nom.

 12.14 mm

T2 Nom.

 16.41 mm

Total Radial Float

 0.51

Driver Size

 #2 Phillips

For Use in Sheet Hardness

 Not Applicable
Thread Specification3 External, ANSI/ASME B1.13M, 6g

Cap Material

 ABS. Temperature limit is 200° F / 93° C

Screw Material

 Carbon Steel

Screw Finish

 Bright Nickel over Copper Flash per ASTM B689, Type II

CAD Supplier

 PennEngineering® (PEM®)

Inventory
  • 1 The colors codes #002 thru #007 are non-stocked standards and available on special order
  • 2 The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”
  • 3 As with all Class 2A/6g external threads with an additive finish, the maximum major and pitch, after plating, may equal basic sizes and be gauged to Class 3A/4h, per ANSI B1.1, Section 8, Table 3A and ANSI B1.13M, Section 8, Paragraph 8.2.