Search our PEM catalog here, or view other manufacturers.

  1. Manufacturers
  2. Services
  3. About Us
  4. What’s New
  5. Careers
  6. Contact
  7. Search

Product Catalog

Tel 800.466.1940
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Request CAD files
  • Joining two panels of similar or dissimilar metals.
  • Can be also used for single point hinging applications (not primary use).
Unit of Measure

Panel 1 Thickness ±0.08mm/±.003in

 1.20 mm.047 in

Panel 1 Mounting Hole +0.08mm/+.003 –.000in

 5.00 mm.197 in
Panel 2 Thickness Min.1 1.20 mm.047 in

Panel 2 Mounting Hole +0.08mm/+.003 –.000in

 4.00 mm.157 in

C1 Max.

 4.98 mm.196 in
a1306_1.jpg

C2 Max.

 3.97 mm.156 in

E Max.

 5.56 mm.219 in
L Max.2 2.31 mm.091 in
Min. Dist. Hole C/L to Edge3 3.6 mm.14 in

Standard Material

 Low Carbon Steel

Standard Finish

 Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless
For Use in Sheet Hardness4 HRB 80 / HB 150 or less

CAD Supplier

 PennEngineering® (PEM®)

Inventory
  • 1 Fastener will provide flush application at minimum sheet thickness.
  • 2 The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”
  • 3 To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.
  • 4 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.