Product Catalog

Batch CAD Cart (0) ▾

Request Information Add to CAD Cart

Enlarged head diameter reduces stress on panel.
Thicker head allows for larger hole in attached panels.
Clinch design provides high-strength in sheets as thin as .031”.
Recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 85 or less and HB (Hardness Brinell) 165 or less.

Unit of Measure

Thread Size	N/A .313-18 (5/16-18)
Thread Code	N/A 0518
Length Code	N/A 8
Min. Sheet Thickness	N/A .031 in
Hole Size in Sheet + .005 - .000	N/A .312 in
L - Length ± .015¹	N/A .500 in
H ± .01	N/A .586 in
S Max.²	N/A .117 in
T Max.	N/A .099 in
Max. Hole in Attached Parts	N/A .402 in
Min. Dist. Hole C/L to Edge³	N/A .596 in
Thread Strength	N/A 120 ksi
For Use in Sheet Hardness	N/A HRB 85 / HB 165 or Less
Thread Specification	N/A External, ASME B1.1, 2A
Fastener Material	N/A Hardened Carbon Steel
Standard Finish	N/A Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless
CAD Supplier	N/A PennEngineering® (PEM®)
Inventory	N/A {0}

¹ The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”
² Threads are gageable to within 2 pitches of the “S” Max. dimension. A class 3B/5H maximum material commercial nut shall pass up to the “S” Max. dimension.
³ To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.

Search our PEM catalog here, or view other manufacturers.