Hi-Tech Fasteners, Inc. - ReelFast® Panel Fastener Assembly - Type PSHP - Metric

Unit of Measure

Items	PSHP-M3-0L001 ReelFast® Panel Fastener Assembly - Type PSHP - Metric Add To Cart Request Quote	PSHP-M3-1L001 ReelFast® Panel Fastener Assembly - Type PSHP - Metric Add To Cart Request Quote	PSHP-M3.5-0L001 ReelFast® Panel Fastener Assembly - Type PSHP - Metric Add To Cart Request Quote	PSHP-M3.5-1L001 ReelFast® Panel Fastener Assembly - Type PSHP - Metric Add To Cart Request Quote	PSHP-M3-0L002 ReelFast® Panel Fastener Assembly - Type PSHP - Metric Add To Cart Request Quote
Description	N/A Simply snap screw into retainer to complete assembly, spring action of plastic “fingers” holds screw in retracted position Lobed Black ABS Cap standard Other molded-thru colors available on special order If you require a custom color or yo
Thread Size x Pitch	N/A M3 x 0.5	N/A M3 x 0.5	N/A M3.5 x 0.6	N/A M3.5 x 0.6	N/A M3 x 0.5
Cap Color¹	N/A Black (standard) #001	N/A Black (standard) #001	N/A Black (standard) #001	N/A Black (standard) #001	N/A Red #002
CAD View	N/A Retracted
A	N/A 1.53 mm
C ± 0.25	N/A 11.18 mm
E ± 0.25	N/A 13.77 mm
G ± 0.64	N/A 4.78 mm	N/A 6.30 mm	N/A 4.78 mm	N/A 6.30 mm	N/A 4.78 mm
L ± 0.38²	N/A 12.95 mm	N/A 14.48 mm	N/A 12.95 mm	N/A 14.48 mm	N/A 12.95 mm
P ± 0.64	N/A 0 mm	N/A 0.66 mm	N/A 0 mm	N/A 0.66 mm	N/A 0 mm
T Nom.	N/A 16.84 mm	N/A 18.36 mm	N/A 16.84 mm	N/A 18.36 mm	N/A 16.84 mm
T₁ Nom.	N/A 12.14 mm
T₂ Nom.	N/A 16.41 mm
Total Radial Float	N/A 0.38	N/A 0.38	N/A 0.51	N/A 0.51	N/A 0.38
Driver Size	N/A #1 Phillips	N/A #1 Phillips	N/A #2 Phillips	N/A #2 Phillips	N/A #1 Phillips
For Use in Sheet Hardness	N/A Not Applicable
Thread Specification³	N/A External, ANSI/ASME B1.13M, 6g
Cap Material	N/A ABS. Temperature limit is 200° F / 93° C
Screw Material	N/A Carbon Steel
Screw Finish	N/A Bright Nickel over Copper Flash per ASTM B689, Type II
CAD Supplier	N/A PennEngineering® (PEM®)
Inventory	N/A {0}	N/A {0}	N/A {0}	N/A {0}	N/A {0}
¹ The colors codes #002 thru #007 are non-stocked standards and available on special order ² The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L” ³ As with all Class 2A/6g external threads with an additive finish, the maximum major and pitch, after plating, may equal basic sizes and be gauged to Class 3A/4h, per ANSI B1.1, Section 8, Table 3A and ANSI B1.13M, Section 8, Paragraph 8.2.