Hi-Tech Fasteners, Inc. - PS10 Flush-Mounted Screw - Metric

Unit of Measure

Items	PS10-M3-40 PS10 Flush-Mounted Screw - Metric Add To Cart Request Quote	PS10-M4-40 PS10 Flush-Mounted Screw - Metric Add To Cart Request Quote	PS10-M5-40 PS10 Flush-Mounted Screw - Metric Add To Cart Request Quote
Thread Size x Pitch	N/A M3 x 0.5	N/A M4 x 0.7	N/A M5 x 0.8
Type¹	N/A PS10
Thread Code	N/A M3	N/A M4	N/A M5
Screw Length Code	N/A 40
E Nom.	N/A 4.70 mm	N/A 6.30 mm	N/A 7.10 mm
H + 0.05 -0.15	N/A 1.91 mm
L ± 0.25²	N/A 8.38 mm
T Nom.	N/A 3.30 mm
Thread Specification³	N/A ANSI/ASME B1.13M, 6g
Material	N/A 300 Series Stainless Steel
Finish	N/A Passivated and/or tested per ASTM A380
CAD Supplier	N/A PennEngineering® (PEM®)
Inventory	N/A {0}	N/A {0}	N/A {0}
¹ 2B (unified) and 6H (metric) go gauge may stop at pilot end but class 3A (unified) and 4h (metric) screws will pass through with finger torque. ² The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L” ³ As with all external plated threads, Class 2A/6g, the maximum major and pitch, after plating, may equal basic sizes and be gauged to Class 3A/4h, per ANSI B1.1, Section 8, Table 3A and ANSI B1.13M, Section 8, Paragraph 8.2.