Hi-Tech Fasteners Inc.
Hi-Tech Fasteners, Inc.
4940 Winchester Boulevard
Frederick, Maryland 21703-7400

Toll Free: 800.466.1940
Tel: 301.831.1277
Fax: 301.831.8296
Email: sales@hitechfasteners.com
Website: www.hitechfasteners.com
Print Back
  • Simply snap screw into retainer to complete assembly, spring action of plastic “fingers” holds screw in retracted position
  • Lobed Black ABS Cap standard
  • Other molded-thru colors available on special order
  • If you require a custom color or yo
Unit of Measure

Specifications

Thread Size

 N/A .112-40 (#4-40)
Cap Color1 N/A
Blue #006

CAD View

 N/A Retracted

C ± .010

 N/A .440 in PSHP_1.jpg

E ± .010

 N/A .542 in

G ± .025

 N/A .188 in
L ± .0152 N/A .510 in

P ± .025

 N/A .000 in

T Nom.

 N/A .663 in

T1 Nom.

 N/A .478 in

T2 Nom.

 N/A .646 in

Total Radial Float

 N/A .015

Driver Size

 N/A #1 Phillips

For Use in Sheet Hardness

 N/A Not Applicable
Thread Specification3 N/A External, ANSI B1.1, 2A

Cap Material

 N/A ABS. Temperature limit is 200° F / 93° C

Screw Material

 N/A Carbon Steel

Screw Finish

 N/A Bright Nickel over Copper Flash per ASTM B689, Type II

CAD Supplier

 N/A PennEngineering® (PEM®)

Inventory

 N/A {0}
  • 1 The colors codes #002 thru #007 are non-stocked standards and available on special order
  • 2 The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”
  • 3 As with all Class 2A/6g external threads with an additive finish, the maximum major and pitch, after plating, may equal basic sizes and be gauged to Class 3A/4h, per ANSI B1.1, Section 8, Table 3A and ANSI B1.13M, Section 8, Paragraph 8.2.