Hi-Tech Fasteners Inc.
Hi-Tech Fasteners, Inc.
4940 Winchester Boulevard
Frederick, Maryland 21703-7400

Toll Free: 800.466.1940
Tel: 301.831.1277
Fax: 301.831.8296
Email: sales@hitechfasteners.com
Website: www.hitechfasteners.com
Print Back
  • Low cost design.
  • Small, compact and low profile design for limited access areas.
  • Two screw lengths.
  • Universal slot/Phillips recess standard.
Unit of Measure

Specifications

Thread Size

 N/A .138-32 (#6-32)

Type

 N/A HSCB

Thread Code

 N/A 632

Screw Length Code

 N/A 4
L ± .0151 N/A .320 in HSCB_2_1.jpg

Min. Sheet Thickness

 N/A .040 in

Hole Size in Sheet + 0.003 - 0.000

 N/A .138 in

Es ± .010

 N/A .352 in

H1 Ref.

 N/A .300 in

H2 Ref.

 N/A .470 in

Ts Min.

 N/A .130 in

Driver Size

 N/A #2 Phillips DriverSize_Philips_1.jpg
Min. Dist. Hole C/L to Edge2 N/A .178 in
Thread Specification3 N/A External ASME B1.1, 2A

Material

 N/A Hardened Carbon Steel

Finish

 N/A Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless

For Use in Sheet Hardness

 N/A HRB 80 or Less (Hardness Rockwell "B" Scale)
HB 150 or Less (Hardness Brinell)

CAD View

 N/A Unfastened

CAD Supplier

 N/A PennEngineering® (PEM®)

Inventory

 N/A {0}
  • 1 The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”
  • 2 To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.
  • 3 As with all Class 2A/6g external threads with an additive finish, the maximum major and pitch, after plating, may equal basic sizes and be gauged to Class 3A/4h, per ANSI B1.1, Section 8, Table 3A and ANSI B1.13M, Section 8, Paragraph 8.2.