Part # SOSG-3.5M3-4, Grounding Standoffs - Types SOSG, SOAG

These standoffs, which use the proven self-clinching design, install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.

Types SOAG and SOSG grounding standoffs are designed for clinching into steel or a

Unit of Measure

Specifications

Thread Size x Pitch	N/A M3 x 0.5
Thread Code	N/A 3.5M3
Length Code	N/A 4
Min. Sheet Thickness	N/A 1 mm
Hole Size in Sheet + 0.08	N/A 5.40 mm
C - 0.13	N/A 5.39 mm
H ± 0.25	N/A 6.4 mm
L - Length + 0.25¹	N/A 4 mm
P Nom.	N/A 0.76 mm
Anvil Hole Diameter + 0.08	N/A 5.50 mm
Min. Dist. Hole C/L to Edge²	N/A 6.8 mm
For Use in Sheet Hardness³	N/A HRB 70 / HB 125 or Less
Thread Specification	N/A Internal, ANSI/ASME B1.13M, 6H
Fastener Material	N/A 300 Series Stainless Steel
Standard Finish	N/A Passivated and/or tested per ASTM A380
CAD Supplier	N/A PennEngineering® (PEM®)
Inventory	N/A {0}

¹ For special lengths greater than .500” / 12 mm, Types SOSG and SOAG are blind threaded.
² To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.
³ HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.

Specifications

Thread Size x Pitch

Thread Code

Length Code

Min. Sheet Thickness

Hole Size in Sheet + 0.08

C - 0.13

H ± 0.25

P Nom.

Anvil Hole Diameter + 0.08

Thread Specification

Fastener Material

Standard Finish

CAD Supplier

Inventory