Part # SOSG-8632-6, Grounding Standoffs - Types SOSG, SOAG

These standoffs, which use the proven self-clinching design, install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.

Types SOAG and SOSG grounding standoffs are designed for clinching into steel or a

Unit of Measure

Specifications

Thread Size	N/A .138-32 (#6-32)
Thread Code	N/A 8632
Length Code	N/A 6
Min. Sheet Thickness	N/A .050 in
Hole Size in Sheet + .003 - .000	N/A .281 in
C + .000 - .005	N/A .280 in
H ± .005	N/A .312 in
L - Length + .010 –.000¹	N/A .187 in
P Nom.	N/A .030 in
Anvil Hole Diameter + .003 -.000	N/A .284 in
Min. Dist. Hole C/L to Edge²	N/A .31 in
For Use in Sheet Hardness³	N/A HRB 70 / HB 125 or Less
Thread Specification	N/A Internal, ANSI B1.1, 2B
Fastener Material	N/A 300 Series Stainless Steel
Standard Finish	N/A Passivated and/or tested per ASTM A380
CAD Supplier	N/A PennEngineering® (PEM®)
Inventory	N/A {0}

¹ For special lengths greater than .500” / 12 mm, Types SOSG and SOAG are blind threaded.
² To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.
³ HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.

Specifications

Thread Size

Thread Code

Length Code

Min. Sheet Thickness

Hole Size in Sheet + .003 - .000

C + .000 - .005

H ± .005

P Nom.

Anvil Hole Diameter + .003 -.000

Thread Specification

Fastener Material

Standard Finish

CAD Supplier

Inventory