Part # SOSG-8632-8, Grounding Standoffs - Types SOSG, SOAG

These standoffs, which use the proven self-clinching design, install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.

Types SOAG and SOSG grounding standoffs are designed for clinching into steel or aluminum chassis while the “gripping teeth” on the opposite end of the standoff firmly contact mating PC board.

If you require a standoff which we do not offer in this bulletin, please contact us. We will be happy to work with you to satisfy your special need.

For special lengths greater than .500”, Types SOSG and SOAG are blind threaded.

Unit of Measure

Specifications

Thread Size	N/A .138-32 (#6-32)
Thread Code	N/A 8632
Length Code	N/A 8
Min. Sheet Thickness	N/A .050 in
Hole Size in Sheet + .003 - .000	N/A .281 in
C + .000 - .005	N/A .280 in
H ± .005	N/A .312 in
L - Length + .010 –.000¹	N/A .250 in
P Nom.	N/A .030 in
Anvil Hole Diameter + .003 -.000	N/A .284 in
Min. Dist. Hole C/L to Edge²	N/A .31 in
For Use in Sheet Hardness³	N/A HRB 70 / HB 125 or Less
Thread Specification	N/A Internal, ANSI B1.1, 2B
Fastener Material	N/A 300 Series Stainless Steel
Standard Finish	N/A Passivated and/or tested per ASTM A380
CAD Supplier	N/A PennEngineering® (PEM®)
Inventory	N/A {0}

¹ For special lengths greater than .500” / 12 mm, Types SOSG and SOAG are blind threaded.
² To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.
³ HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.

Specifications

Thread Size

Thread Code

Length Code

Min. Sheet Thickness

Hole Size in Sheet + .003 - .000

C + .000 - .005

H ± .005

P Nom.

Anvil Hole Diameter + .003 -.000

Thread Specification

Fastener Material

Standard Finish

CAD Supplier

Inventory