Hi-Tech Fasteners Inc.
Hi-Tech Fasteners, Inc.
4940 Winchester Boulevard
Frederick, Maryland 21703-7400

Toll Free: 800.466.1940
Tel: 301.831.1277
Fax: 301.831.8296
Email: sales@hitechfasteners.com
Website: www.hitechfasteners.com
Print Back
  • Joining two panels when one is stainless steel.
  • Offers highest corrosion resistance in product family.
  • Can be also used for single point hinging applications (not primary use).
Unit of Measure

Specifications

Panel 1 Thickness ±0.08mm/±.003in

 N/A 1.20 mm.047 in

Panel 1 Mounting Hole +0.08mm/+.003 –.000in

 N/A 5.00 mm.197 in
Panel 2 Thickness Min.1 N/A 1.20 mm.047 in

Panel 2 Mounting Hole +0.08mm/+.003 –.000in

 N/A 4.50 mm.177 in

C1 Max.

 N/A 4.98 mm.196 in a1306_1.jpg

C2 Max.

 N/A 4.47 mm.176 in

E Max.

 N/A 5.56 mm.219 in
L Max.2 N/A 2.31 mm.091 in
Min. Dist. Hole C/L to Edge3 N/A 3.6 mm.14 in

Standard Material

 N/A Precipitation Hardening Grade Stainless Steel

Standard Finish

 N/A Passivated and/or tested per ASTM A380
For Use in Sheet Hardness4 N/A HRB 88 / HB 183 or Less

CAD Supplier

 N/A PennEngineering® (PEM®)

Inventory

 N/A {0}
  • 1 Fastener will provide flush application at minimum sheet thickness.
  • 2 The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”
  • 3 To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.
  • 4 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.