Hi-Tech Fasteners Inc.
Hi-Tech Fasteners, Inc.
4940 Winchester Boulevard
Frederick, Maryland 21703-7400

Toll Free: 800.466.1940
Tel: 301.831.1277
Fax: 301.831.8296
Email: sales@hitechfasteners.com
Website: www.hitechfasteners.com
Print Back
PEM® TY-D® self-clinching tie-mounts provide secure attachment points for mounting wires to electronic chassis or enclosures. TY-D hardware installs quickly and permanently without screws and eliminates the use of adhesives that typically fail over time and temperature cycling.

TY-D hardware can be a great improvement over traditional mounting methods. They can be placed with assurance at designed locations and angles to remain secure for the life of the assembly; they will not protrude on the reverse side and will not affect the reverse side appearance or clearance; and panels remain flush, minimizing EMI/RFI and contamination of electronics by dust or dirt.
Unit of Measure

Specifications

Type

 N/A TDS
Profile1 N/A 60

Length Code

 N/A 6
L - Length ± .0032 N/A .184 in a1299_1.jpg

Sheet Thickness

 N/A .040 - .070 in

Hole Size In Sheet + .002 -.001

 N/A .312 x .187 in

A ± .003

 N/A .308 in

B ± .006

 N/A .075 in

C ± .006

 N/A .065 in

D ± .006

 N/A .205 in

E ± .006

 N/A .370 in

G - Height ± .006

 N/A .180 in

Min. Hole Edge to Sheet Edge K

 N/A .040 in

Min. Hole Edge to Sheet Edge M

 N/A .196 in

Standard Material

 N/A 17-4 Stainless Steel

Standard Finish

 N/A Passivated and/or tested per ASTM A380

Max. Panel Hardness

 N/A HRB 70 / HB 125 or Less

Inventory

 N/A {0}
  • 1 Reference to typical load rating (in pounds) for appropriate size nylon cable tie.
  • 2 The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”