Part # SGPC-0420-6, Swaging Collar Studs, Non Flush - Type SGPC ™

PEM Type SGPC swaging collar studs can install into most panel material, provide strong torque-out resistance and are suitable for close centerline-to-edge situations. These studs can also accommodate multiple panels as long as the total thickness does not exceed the maximum sheet thickness.

Features and Benefits

Installs into sheets as thin as .024” / 0.6mm.
Can be used to attach dissimilar materials.
Can be installed into most panel materials, including stainless steel and rigid non-metallic panels.
Allows for close centerline-to-edge distance.
Corrosion resistant.
RoHS compliant.

Unit of Measure

Specifications

Thread Size	N/A .250-20 (1/4-20)
Material Code	N/A SGPC
Thread Code	N/A 0420
L - Length ± .015¹	N/A .375 in
Sheet Thickness²	N/A .024 to .047 in
Hole Size in Sheet + .003 - .000	N/A .309 in
Hole Dia. of Attached Panel + .005 - .000	N/A .343 in
H ± .010	N/A .366 in
S Max.³	N/A .131 in
T ± .004	N/A .028 in
Min. Dist. Hole C/L to Edge⁴	N/A .250 in
Fastener Material	N/A 300 Series Stainless Steel
Standard Finish	N/A Passivated and/or tested per ASTM A380
For Use in Sheet Hardness	N/A Any
CAD Supplier	N/A PennEngineering® (PEM®)
Inventory	N/A {0}

¹ The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”
² See installation data for tooling requirements. Contact Technical Support (techsupport@pemnet.com) for other thicknesses.
³ Threads are gageable to within 2 pitches on the “S” Max. dimension. A class 3B/5H maximum material commercial nut shall pass up to the “S” Max. dimension.
⁴ To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.

Specifications

Thread Size

Material Code

Thread Code

Hole Size in Sheet + .003 - .000

Hole Dia. of Attached Panel + .005 - .000

H ± .010

T ± .004

Fastener Material

Standard Finish

For Use in Sheet Hardness

CAD Supplier

Inventory