Hi-Tech Fasteners Inc.
Hi-Tech Fasteners, Inc.
4940 Winchester Boulevard
Frederick, Maryland 21703-7400

Toll Free: 800.466.1940
Tel: 301.831.1277
Fax: 301.831.8296
Email: sales@hitechfasteners.com
Website: www.hitechfasteners.com
Print Back
These standoffs, which use the proven self-clinching design, install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.

Types SO4 standoffs are for installation into stainless steel sheets as thin as 1.02mm.

If you require a standoff which we do not offer in this bulletin, please contact us. We will be happy to work with you to satisfy your special need.
Unit of Measure

Specifications

Thread Size x Pitch

 N/A M3.5 x 0.6

Thread Code

 N/A M3.5

Length Code

 N/A 6

Material Code

 N/A 4

Min. Sheet Thickness

 N/A 1 mm

Hole Size in Sheet + 0.08

 N/A 5.41 mm

B - Counter-Bore Dia. ± 0.13

 N/A 3.90 mm a1352_1.jpg

C - 0.13

 N/A 5.39 mm

D ± 0.25

 N/A 0 mm

H Nom.

 N/A 6.4 mm
L - Length +0.05 –0.131 N/A 6 mm
Min. Dist. Hole C/L to Edge2 N/A 7.1 mm
For Use in Sheet Hardness3 N/A HRB 88 / HB 176 or Less

Thread Specification

 N/A Internal, ANSI/ASME B1.13M, 6H

Fastener Material

 N/A 400 Series Stainless Steel

Standard Finish

 N/A Passivated and/or tested per ASTM A380

CAD Supplier

 N/A PennEngineering® (PEM®)

Inventory

 N/A {0}
  • 1 The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”
  • 2 To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.
  • 3 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.