Hi-Tech Fasteners Inc.
Hi-Tech Fasteners, Inc.
4940 Winchester Boulevard
Frederick, Maryland 21703-7400

Toll Free: 800.466.1940
Tel: 301.831.1277
Fax: 301.831.8296
Email: sales@hitechfasteners.com
Website: www.hitechfasteners.com
Print Back
New self-clinching, threaded microPEM® TackScrew™ (Type TS™) fasteners enable cost effective sheet-to-sheet attachment, by simply pressing into place. The TackScrew™ fastener securely attaches a top sheet or panel to the base material. TackScrew fasteners can be removed by simply unscrewing similar to other threaded fasteners.

Features and Benefits
  • Simple, press-in installation for secure attachment
  • Proven clinch technology resists vibrational loosening.
  • Replaces micro screws, eliminating installation issues including:
    – Cost of locking patch
    – Cost of threaded insert or tapped hole
    – Cost of driver bits
    – Cost of rework due to cross-threading and driver bit “cam-out”
  • Can be installed automatically for high volume application.
  • Twists out (unscrew) if removal is necessary.Can be reinstalled one time using a thread locking adhesive.
Ideal for today’s compact electronics
  • Laptops
  • Notebooks
  • Tablet Computers
  • Cell/Smart Phones
  • Gaming / Hand Held Devices
  • Wearables
  • Automotive Electronics
Unit of Measure

Specifications

Fastener Material

 N/A Heat-treated 400 Series Stainless Steel

Base Panel Hole Size Code

 N/A 10

Top Sheet Thickness Code

 N/A 025

Top Sheet Thickness

 N/A 0.2 to 0.28 mm.008 to .011 in
Base Panel Min. Sheet Thickness1 N/A 0.91 mm.036 in

Top Sheet Hole Size ±0.05mm/ ±.002in

 N/A 1.47 mm.058 in

Base Panel Hole Size ±0.025mm/ ±.001in

 N/A 0.99 mm.039 in

A ± 0.05mm/±.002in

 N/A 0.406 mm.016 in microPEM-TackScrew-2_1.jpg

H ± 0.1mm/±.004in

 N/A 2 mm.079 in
L ± 0.1mm/±.004in2 N/A 0.64 mm.025 in

P ± 0.05mm/±.002in

 N/A 1.3 mm.051 in

T ± 0.1mm/±.004in

 N/A 0.25 mm.010 in
Min. Dist. Hole C/L to Edge3 N/A 1 mm.039 in

Standard Finish

 N/A Passivated and/or tested per ASTM A380

For Use in Sheet Hardness

 N/A HRB 89 or less (Hardness Rockwell “B” scale)
HB 187 or less (Hardness Brinell)

CAD Supplier

 N/A PennEngineering® (PEM®)

Inventory

 N/A {0}
  • 1 Minimum sheet to prevent protrusion from through hole or minimum blind hole depth.
  • 2 The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”
  • 3 To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.