Type SH™ Hard Panel Nuts - Metric On Hi-Tech Fasteners, Inc.

Installs into thin, harder, high strength steel materials (high strength steel sheets at 975MPA maximum ultimate tensile)
Allows overall weight reduction for all vehicles
Provides lower installed cost
Unplated threads may be oversized sized as permitted by thread standards to accept minimum plating thickness of .00020”/.0051 mm

Compare to other thin sheet fastening devices:

Part #	Thread Size x Pitch	A (Shank) Max.	Hole Size in Sheet + 0.08	E ± 0.25	Fastener Material	CAD	Inventory
SH-M6-1X	N/A M6 x 1	N/A 1.38 mm	N/A 8.75 mm	N/A 11.18 mm	N/A Hardened Alloy Steel	N/A	N/A {0}
SH-M6-2X	N/A M6 x 1	N/A 2.21 mm	N/A 8.75 mm	N/A 11.18 mm	N/A Hardened Alloy Steel	N/A	N/A {0}
SH-M8-1X	N/A M8 x 1.25	N/A 1.38 mm	N/A 10.5 mm	N/A 12.7 mm	N/A Hardened Alloy Steel	N/A	N/A {0}
SH-M8-2X	N/A M8 x 1.25	N/A 2.21 mm	N/A 10.5 mm	N/A 12.7 mm	N/A Hardened Alloy Steel	N/A	N/A {0}
SH-M10-1X	N/A M10 x 1.5	N/A 2.21 mm	N/A 14 mm	N/A 17.35 mm	N/A Hardened Alloy Steel	N/A	N/A {0}