Search our PEM catalog here, or view other manufacturers.

  1. Manufacturers
  2. Services
  3. About Us
  4. What’s New
  5. Careers
  6. Contact

Product Catalog

Batch CAD Cart (0)
  • Cart is empty
These standoffs, which use the proven self-clinching design, install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.

When blind-threaded types are used, outer sheet surfaces are not only flush, but c
Unit of Measure

Thread Size x Pitch

M3 x 0.5

Thread Code

3.5M3

Length Code

6

Min. Sheet Thickness

1 mm

Hole Size in Sheet + 0.08

5.41 mm

C - 0.13

5.39 mm
a1351_1.jpg

F Min.

3.20 mm

H Nom.

6.4 mm
L - Length +0.05 –0.131 6 mm
Min. Dist. Hole C/L to Edge2 6.8 mm
For Use in Sheet Hardness3 HRB 80 / HB 150 or less

Thread Specification

Internal, ANSI/ASME B1.13M, 6H

Fastener Material

Heat-Treated Carbon Steel

Standard Finish

Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless

CAD Supplier

PennEngineering® (PEM®)

Inventory

  • 1 The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”
  • 2 To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.
  • 3 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.