Search our PEM catalog here, or view other manufacturers.

  1. Manufacturers
  2. Services
  3. About Us
  4. What’s New
  5. Careers
  6. Contact
  7. Search

Product Catalog

Tel 800.466.1940
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
PEM® KEYHOLE® Standoffs are designed so that a PC board or panel can be quickly slipped into place and then removed from an assembly by simply sliding the board sideways and lifting it off. PEM KEYHOLE fasteners can save valuable time and dramatically reduce the amount of loose hardware required. Type SKC can be used for spacing or hanging of replaceable components. Typically, several SKC standoffs are used with one standard PEM threaded standoff which accepts a screw to secure the board or component against any unwanted movement.

Type SKC - Allows detachable spacing of two sheets
  • Clinch feature mounts fastener permanently into metal sheet.
  • Unique barrel design allows for quick attachment and detachment.
  • Head is flush with one side of metal sheet.
  • Makes horizontal or vertical component mounting possible.
Unit of Measure

Panel 1 (Bottom) Sheet Thickness Min.

 N/A .040 in

Panel 1 (Bottom) Mounting Hole B + .003 - .000

 N/A .213 in
Panel 2 (Top) Thickness Range1 N/A .057 to .064 in

Panel 2 (Top) Mounting Hole A1 Nom.

 N/A .059 in

Panel 2 (Top) Mounting Hole A2 ± .003

 N/A .118 in

Panel 2 (Top) Mounting Hole A3 ± .003

 N/A .197 in

Panel 2 (Top) Mounting Hole A4 Min.

 N/A .148 in a1326_1.jpg
Panel 1 (Bottom) Sheet Hardness Max.2 N/A HRB 70 / HB 125

Panel 2 (Top) Material

 N/A Any

A ± .003

 N/A .099 in SKC_1.jpg

B ± .003

 N/A .177 in

C Max.

 N/A .212 in

D Anvil Hole + .003 - .000

 N/A .216 in

H Nom.

 N/A .250 in
L - Length ± .0053 N/A .500 in

M Max.

 N/A .108 in

S ± .003

 N/A .068 in

Panel 1 (Bottom) Edge Distance C1 Min.

 N/A .260 in a1324_1.jpg

Panel 1 (Bottom) Location Tolerance Max.

 N/A ±.005 in

Panel 2 (Top) Edge Distance C2 Min.

 N/A .160 in

Standard Material

 N/A 300 Series Stainless Steel

Standard Finish

 N/A Passivated and/or tested per ASTM A380

CAD Supplier

 N/A PennEngineering® (PEM®)

Inventory

 N/A {0}
  • 1 Fastener will provide flush application at minimum sheet thickness.
  • 2 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.
  • 3 The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”