Product Catalog
Tel 800.466.1940
Batch CAD Cart (0)
▾
These standoffs, which use the proven self-clinching design, install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.
Unthreaded standoffs are also available for spacing multi-panel assemblies.
Unthreaded standoffs are also available for spacing multi-panel assemblies.
Unit of Measure
Thru-Hole Code |
N/A 6116 |
Length Code |
N/A 16 |
Min. Sheet Thickness |
N/A .040 in |
Hole Size in Sheet + .003 - .000 |
N/A .213 in |
B - Thru-hole Diameter + .004 - .003 |
N/A
.116 in
Loading zoom |
C + .000 - .005 |
N/A .212 in |
H Nom. |
N/A .250 in |
L - Length +.002 –.0051 | N/A .500 in |
Min. Dist. Hole C/L to Edge2 | N/A .27 in |
For Use in Sheet Hardness3 | N/A HRB 80 / HB 150 or less |
Fastener Material |
N/A Heat-Treated Carbon Steel |
Standard Finish |
N/A Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless |
CAD Supplier |
N/A PennEngineering® (PEM®) |
Inventory |
- 1 The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”
- 2 To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.
- 3 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.