Search our PEM catalog here, or view other manufacturers.

  1. Manufacturers
  2. Services
  3. About Us
  4. What’s New
  5. Careers
  6. Contact
  7. Search

Product Catalog

Tel 800.466.1940
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Request CAD files
PEM Type MPP, self-clinching microPEM® pins are ideal for today’s compact electronic assemblies. Simply pressed into a properly sized mounting hole, these micro pins clinch permanently into place. They can be installed into a variety of sheet materials up to HRB 92/HB 195 in hardness and they offer excellent corrosion resistance.

Features and Benefits
  • Satisfy demanding micro positioning and alignment applications.
  • Head mounts flush into panels as thin as 0.5mm.
  • Chamfered end makes mating hole
    • more
Unit of Measure

Pin Diameter P ± 0.038

 1.50 mm
L - Length ± 0.151
3 mm
MPP-Self-clinching-Micro-Pins_1.jpg

Min. Sheet Thickness

 0.50 mm

Hole Size in Sheet + 0.025

 1.55 mm

D ± 0.1

 1.03 mm

H ± 0.25

 2.24 mm
S Max.2 0.70 mm
Min. Dist. Hole C/L to Edge3 2.60 mm

Anvil Length

 6.18 mm
For Use in Sheet Hardness4 HRB 92 / HB 195 or Less

Fastener Material

 Age Hardened A286 Stainless Steel

Standard Finish

 Passivated and/or tested per ASTM A380

CAD Supplier

 PennEngineering® (PEM®)

Inventory
  • 1 The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”
  • 2 Pin diameter may exceed max. in this region.
  • 3 To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.
  • 4 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell