Tel 800.466.1940
Thread Size |
N/A .190-32 (#10-32) |
Type |
N/A Knurled Cap - PF11MW |
Thread Code |
N/A 032 |
| Shank Code1 | N/A 1 |
Screw Length Code |
N/A 2 |
A Max. Sheet Thickness |
N/A
.063 in
 |
B Min. |
N/A .121 in |
D Hole Size in Sheet + 0.003 - 0.001 |
N/A .346 in |
E ± .010 |
N/A .514 in |
G Nom. |
N/A .350 in |
H Min. |
N/A .469 in |
| L1 Nom.2 | N/A .157 in |
L2 Max. |
N/A .140 in |
T1 Nom. |
N/A .450 in |
T2 Nom. |
N/A .640 in |
Driver Size |
N/A
Slotted/#2 Phillips
 |
Min. Float |
N/A .076 in |
W Nom. |
N/A .407 in |
| Thread Specification3 | N/A ANSI B1.1, 2A |
Material Knob |
N/A Aluminum |
Material Retainer |
N/A Aluminum |
Material Screw |
N/A Heat-Treated Carbon Steel |
Material Spring |
N/A 300 Series Stainless Steel |
Material Washer |
N/A 300 Series Stainless Steel |
Finish Knob |
N/A Natural Finish |
Finish Retainer |
N/A Natural finish |
Finish Screw |
N/A Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless |
Finish Spring |
N/A Natural Finish |
CAD View |
N/A Unfastened |
CAD Supplier |
N/A PennEngineering® (PEM®) |
Inventory |
N/A {0} |
CAD Note |
N/A Mating washers for PF11MW / PF12MW panel fasteners are not shown in 3D drawings. |
- 1 Other shank and screw lengths available.
- 2 The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”
- 3 As with all external plated threads, Class 2A/6g, the maximum major and pitch, after plating, may equal basic sizes and be gauged to Class 3A/4h, per ANSI B1.1, Section 8, Table 3A and ANSI B1.13M, Section 8, Paragraph 8.2
