Search our PEM catalog here, or view other manufacturers.

  1. Manufacturers
  2. Services
  3. About Us
  4. What’s New
  5. Careers
  6. Contact
  7. Search

Product Catalog

Tel 800.466.1940
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
  • Joining two panels when one is stainless steel.
  • Offers highest corrosion resistance in product family.
  • Can be also used for single point hinging applications (not primary use).
Unit of Measure

Panel 1 Thickness ±0.08mm/±.003in

 N/A 1.00 mm.039 in

Panel 1 Mounting Hole +0.08mm/+.003 –.000in

 N/A 3.00 mm.118 in
Panel 2 Thickness Min.1 N/A 1.00 mm.039 in

Panel 2 Mounting Hole +0.08mm/+.003 –.000in

 N/A 2.50 mm.098 in

C1 Max.

 N/A 2.98 mm.117 in a1306_1.jpg

C2 Max.

 N/A 2.48 mm.097 in

E Max.

 N/A 3.76 mm.148 in
L Max.2 N/A 1.90 mm.075 in
Min. Dist. Hole C/L to Edge3 N/A 2.54 mm.100 in

Standard Material

 N/A Precipitation Hardening Grade Stainless Steel

Standard Finish

 N/A Passivated and/or tested per ASTM A380
For Use in Sheet Hardness4 N/A HRB 88 / HB 183 or Less

CAD Supplier

 N/A PennEngineering® (PEM®)

Inventory

 N/A {0}
  • 1 Fastener will provide flush application at minimum sheet thickness.
  • 2 The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”
  • 3 To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.
  • 4 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.