Search our PEM catalog here, or view other manufacturers.

  1. Manufacturers
  2. Services
  3. About Us
  4. What’s New
  5. Careers
  6. Contact
  7. Search

Product Catalog

Tel 800.466.1940
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
  • Single point hinging applications.
  • Can be also used for single point hinging applications (not primary use).
  • Type SFW fasteners are shipped with mating washers (made of carbon steel, Zinc Plated, 5µm, Colorless).
Unit of Measure

Panel 1 Thickness ±0.08mm/±.003in

 N/A 1.60 mm.063 in

Panel 1 Mounting Hole +0.08mm/+.003 –.000in

 N/A 3.00 mm.118 in
Panel 2 Thickness Min.1 N/A 1.60 mm.063 in

Panel 2 Mounting Hole +0.08mm/+.003 –.000in

 N/A 2.50 mm.098 in

C1 Max.

 N/A 2.98 mm.117 in a1307_1.jpg

C2 Max.

 N/A 2.48 mm.097 in

E Max.

 N/A 3.76 mm.148 in
L Max.2 N/A 3.71 mm.146 in

Nominal Gap between Panels

 N/A 0.38-0.51 mm.015-.020 in
Min. Dist. Hole C/L to Edge3 N/A 2.54 mm.100 in

Material Fastener

 N/A Low Carbon Steel

Material Washer

 N/A Carbon Steel

Finish Fastener

 N/A Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless plus sealant/lubricant

Finish Washer

 N/A Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless
For Use in Sheet Hardness4 N/A HRB 80 / HB 150 or less

CAD Supplier

 N/A PennEngineering® (PEM®)

Inventory

 N/A {0}
  • 1 Fastener will provide flush application at minimum sheet thickness.
  • 2 The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”
  • 3 To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.
  • 4 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.