Search our PEM catalog here, or view other manufacturers.

  1. Manufacturers
  2. Services
  3. About Us
  4. What’s New
  5. Careers
  6. Contact

Product Catalog

Batch CAD Cart (0)
  • Cart is empty
PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.

TP4 Pilot Pins satisfy a wide range of positioning, pivot, and alignment applications. The chamfered end makes mating hole location easy
  • Flush-head for sheet thickness of 1.00 mm and greater.
  • Satisfies a wide range of positioning, pivot, and alignment applications.
  • Chamfered end makes mating hole location easy.
  • Type TP4 recommended for use in stainless steel sheets HRB (Rockwell “B” Scale) 92 or less and HB (Hardness Brinell) 195 or less.
Unit of Measure
Items
Unthreaded pins, flush – TP4, TPS

Self-Clinching Pilot Pins - Type TPS™, TP4™ - Metric

Unthreaded pins, flush – TP4, TPS

Self-Clinching Pilot Pins - Type TPS™, TP4™ - Metric

Unthreaded pins, flush – TP4, TPS

Self-Clinching Pilot Pins - Type TPS™, TP4™ - Metric

Unthreaded pins, flush – TP4, TPS

Self-Clinching Pilot Pins - Type TPS™, TP4™ - Metric

Unthreaded pins, flush – TP4, TPS

Self-Clinching Pilot Pins - Type TPS™, TP4™ - Metric
Pin Dia. Code N/A 3 mm N/A 4 mm N/A 3 mm N/A 4 mm N/A 5 mm
Length Code N/A 8 N/A 8 N/A 10 N/A 10 N/A 10
Min. Sheet Thickness N/A 1 mm
Hole Size in Sheet + 0.08 N/A 3.5 mm N/A 4.5 mm N/A 3.5 mm N/A 4.5 mm N/A 5.5 mm
P - Nominal Pin Diameter ± 0.05
N/A 3.00 mm a1381_1.jpg N/A 4.00 mm a1381_1.jpg N/A 3.00 mm a1381_1.jpg N/A 4.00 mm a1381_1.jpg N/A 5.00 mm a1381_1.jpg
L - Length ± 0.41 N/A 8 mm N/A 8 mm N/A 10 mm N/A 10 mm N/A 10 mm
D ± 0.15 N/A 2.11 mm N/A 2.82 mm N/A 2.11 mm N/A 2.82 mm N/A 3.53 mm
H ± 0.4 N/A 5.2 mm N/A 6.12 mm N/A 5.2 mm N/A 6.12 mm N/A 7.19 mm
S Max.2 N/A 2.29 mm
Min. Dist. Hole C/L to Edge3 N/A 6.40 mm N/A 7.1 mm N/A 6.40 mm N/A 7.1 mm N/A 7.60 mm
For Use in Sheet Hardness N/A HRB 92 / HB 195 or Less
Fastener Material N/A 400 Series Stainless Steel
Standard Finish N/A Passivated and/or tested per ASTM A380
CAD Supplier N/A PennEngineering® (PEM®)
Inventory N/A {0} N/A {0} N/A {0} N/A {0} N/A {0}
  • 1 The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”
  • 2 Pin diameter may exceed max. in this region.
  • 3 To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.