Print Back
Self-clinching nuts are installed by placing them in properly sized holes in sheets and applying a parallel squeezing force to the head of the nut. The sheet metal surrounding the head cold flows into an undercut thereby making the fastener an integral part of the sheet. A serrated clinching ring prevents the fastener from rotating after installation.

Type S, SS, CLS, and CLSS nuts provide load-bearing threads in thin sheets with high pushout and torque-out resistance.

Type SP, PEM 300® nuts provide strong load-bearing threads in stainless steel sheets as thin as .030”.
Nuts - Types S, SS, CLS, CLSS,CLA,SP
Self-Clinching Nuts - Types S, SS, CLS, CLSS, SP 2
Unit of Measure
Items Nuts - Types S, SS, CLS, CLSS,CLA,SP
SP-M3-0
Self-Clinching Nuts - Types S, SS, CLS, CLSS, SP - Metric
Nuts - Types S, SS, CLS, CLSS,CLA,SP
SP-M4-0
Self-Clinching Nuts - Types S, SS, CLS, CLSS, SP - Metric
Nuts - Types S, SS, CLS, CLSS,CLA,SP
SP-M5-0
Self-Clinching Nuts - Types S, SS, CLS, CLSS, SP - Metric
Nuts - Types S, SS, CLS, CLSS,CLA,SP
SP-M3-1
Self-Clinching Nuts - Types S, SS, CLS, CLSS, SP - Metric
Nuts - Types S, SS, CLS, CLSS,CLA,SP
SP-M4-1
Self-Clinching Nuts - Types S, SS, CLS, CLSS, SP - Metric
Description N/A Type SP, PEM 300® nuts provide strong load-bearing threads in stainless steel sheets as thin as .030”.

Type SP is recommended for use in stainless steel sheets HRB (Rockwell "B" scale) 90 or less and HB (Hardness Brinell) 185 or less.
Thread Size x Pitch N/A M3 x 0.5 N/A M4 x 0.7 N/A M5 x 0.8 N/A M3 x 0.5 N/A M4 x 0.7
Thread Code N/A M3 N/A M4 N/A M5 N/A M3 N/A M4
Shank Code1 N/A 0 N/A 0 N/A 0 N/A 1 N/A 1
A (Shank) Max. N/A 0.77 mm a1383_1.jpg N/A 0.77 mm a1383_1.jpg N/A 0.77 mm a1383_1.jpg N/A 0.97 mm a1383_1.jpg N/A 0.97 mm a1383_1.jpg
Rec. Min. Sheet Thickness2 N/A 0.8 mm N/A 0.8 mm N/A 0.8 mm N/A 1 mm N/A 1 mm
Hole Size in Sheet + 0.08 N/A 4.22 mm N/A 5.41 mm N/A 6.35 mm N/A 4.22 mm N/A 5.41 mm
C Max. N/A 4.2 mm N/A 5.38 mm N/A 6.33 mm N/A 4.2 mm N/A 5.38 mm
E ± 0.25 N/A 6.35 mm N/A 7.87 mm N/A 8.64 mm N/A 6.35 mm N/A 7.87 mm
T ± 0.25 N/A 1.5 mm N/A 2 mm N/A 2 mm N/A 1.5 mm N/A 2 mm
Min. Dist. Hole C/L to Edge3 N/A 4.8 mm N/A 6.9 mm N/A 7.1 mm N/A 4.8 mm N/A 6.9 mm
For Use in Sheet Hardness4 N/A HRB 90 / HB 185 or Less
Thread Specification N/A Internal, ASME B1.13M, 6H
Fastener Material N/A Age Hardened A286 Stainless Steel
Standard Finish N/A Passivated and/or tested per ASTM A380
CAD Supplier N/A PennEngineering® (PEM®)
Inventory N/A {0} N/A {0} N/A {0} N/A {0} N/A {0}
  • 1 Other shank and screw lengths available.
  • 2 For maximum performance, we recommend that you use the maximum shank length for your sheet thickness.
  • 3 To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.
  • 4 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.