Hi-Tech Fasteners Inc.
Hi-Tech Fasteners, Inc.
4940 Winchester Boulevard
Frederick, Maryland 21703-7400

Toll Free: 800.466.1940
Tel: 301.831.1277
Fax: 301.831.8296
Email: sales@hitechfasteners.com
Website: www.hitechfasteners.com
Print Back
PEM® S-RT™ free-running locknuts are free-running until clamp load is induced. A modified thread angle on the loaded flank provides the vibration resistant locking feature.
  • Screw turns freely until a clamp load is applied.
  • Resistant to vibrational loosening.
  • Back side of panel is flush or sub-flush for screw installation.
  • Locking feature reusability is not affected by number of on/off cycles.
  • Uses same mounting hole and installation tooling as standard S™ nut fasteners found in PEM® Bulletin
more
Unit of Measure

Specifications

Thread Size

 .190-32 (#10-32)

Thread Code

 RT032
Shank Code1 0

A (Shank) Max.

 .030 in RT-Drawing.jpg
Rec. Min. Sheet Thickness2 .030 in

Hole Size in Sheet + .003 - .000

 .250 in

C Max.

 .249 in

E ± .010

 .340 in

T ± .010

 .090 in
Min. Dist. Hole C/L to Edge3 .28 in

For Use in Sheet Hardness

 HRB 80 / HB 150 or less

Thread Specification

 Modified thread form on loaded flank. Will accept a maximum material 6g screw.

Fastener Material

 Hardened Carbon Steel

Standard Finish

 Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless

CAD Supplier

 PennEngineering® (PEM®)

Inventory
  • 1 Other shank and screw lengths available.
  • 2 For maximum performance, we recommend that you use the maximum shank length for your sheet thickness.
  • 3 To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.