Hi-Tech Fasteners, Inc. - Captive Panel Screw-Tool only, Spinning Clinch Bolt, Self-retracting Spring - Metric Type SCBR

PEM Type SCBR™ Spinning Clinch Bolt installs by simply pressing it into a properly sized hole. The controlled clinching action permanently captivates the screw and spring in the panel and allows the screw to spin freely in the sheet.

Features and Benefits

Permanently captivates into sheets as thin as .040” / 1.02 mm.
Spring keeps screw retracted when disengaged.
Provides economical self-retracting captive screw.
Replaces loose hardware.
Allows for close centerline-to-edge distance.
RoHS compliant.

Type SCBR screws are shipped with mating springs.

Captive panel screw-Tool only, spinning clinch bolt, self-retracting spring 2

Unit of Measure

Items	SCBR-M3-12ZI Captive Panel Screw-Tool only, Spinning Clinch Bolt, Self-retracting Spring - Metric Type SCBR Add To Cart Request Quote	SCBR-M4-12ZI Captive Panel Screw-Tool only, Spinning Clinch Bolt, Self-retracting Spring - Metric Type SCBR Add To Cart Request Quote
Thread Size x Pitch	N/A M3 x 0.5	N/A M4 x 0.7
Type	N/A SCBR
Thread Code	N/A M3	N/A M4
Screw Length Code	N/A 12
Min. Sheet Thickness	N/A 1.02 mm
Hole Size in Sheet + 0.08	N/A 3 mm	N/A 4 mm
E + 0.13 -0.25	N/A 9.10 mm	N/A 10.70 mm
H1 ± 0.13	N/A 4.20 mm	N/A 4.50 mm
H2 Ref.	N/A 11.80 mm	N/A 12.10 mm
L - Length ± 0.4¹	N/A 12 mm
T Nom.	N/A 3.30 mm
Driver Size	N/A #1 Phillips	N/A #2 Phillips
Min. Dist. Hole C/L to Edge²	N/A 4.5 mm	N/A 5.40 mm
Thread Specification	N/A ANSI/ASME B1.13M, 6g
Material	N/A Heat-Treated Carbon Steel
Finish	N/A Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless
Finish Spring	N/A Natural Finish
For Use in Sheet Hardness	N/A HRB 80 or Less (Hardness Rockwell “B” Scale) / HB 150 or Less (Hardness Brinell)
CAD View	N/A Unfastened
CAD Supplier	N/A PennEngineering® (PEM®)
Inventory	N/A {0}	N/A {0}
¹ The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L” ² To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.