Product Catalog

Tel 800.466.1940

Batch CAD Cart (0) ▾

Installs into thin, harder, high strength steel materials (high strength steel sheets at 975MPA maximum ultimate tensile)
Allows overall weight reduction for all vehicles
Provides lower installed cost
Unplated threads may be oversized sized as permitted by thread standards to accept minimum plating thickness of .00020”/.0051 mm

Compare to other thin sheet fastening devices:

Addresses environmental concerns
Smaller outer diameter
Lighter weight
Flush on reverse side of panel
Close to edge of panel mounting
No embossing required
Hardened nut material provides stronger thread strength
Can be installed automatically using press or in-die technology

1 - 5 of 5 | Results Per Page | View | Unit of Measure

1

Request Information Compare Items Add to CAD Cart

Part #	Thread Size	A (Shank) Max.	Hole Size in Sheet + .003 - .000	E ± .010	Fastener Material	CAD	Inventory	Add To Cart/Request Quote

SH-0420-1X	N/A .250-20 (1/4-20)	N/A .054 in	N/A .344 in	N/A .440 in	N/A Hardened Alloy Steel	N/A	N/A {0}	Add To Cart Request Quote
SH-0420-2X	N/A .250-20 (1/4-20)	N/A .087 in	N/A .344 in	N/A .440 in	N/A Hardened Alloy Steel	N/A	N/A {0}	Add To Cart Request Quote
SH-0518-1X	N/A .313-18 (5/16-18)	N/A .054 in	N/A .413 in	N/A .500 in	N/A Hardened Alloy Steel	N/A	N/A {0}	Add To Cart Request Quote
SH-0518-2X	N/A .313-18 (5/16-18)	N/A .087 in	N/A .413 in	N/A .500 in	N/A Hardened Alloy Steel	N/A	N/A {0}	Add To Cart Request Quote
SH-0616-1X	N/A .375-16 (3/8-16)	N/A .087 in	N/A .500 in	N/A .623 in	N/A Hardened Alloy Steel	N/A	N/A {0}	Add To Cart Request Quote

1 - 5 of 5 | Results Per Page | View | Unit of Measure

1